MSFS
-
Select Operation Mode > Realistic Mode in tablet.
-
Before Engine Start Engine Start RIGHT (LEFT is similar) Before Taxi
-
Flight plan Power up Fuel and Payload FMC Setup EFIS Overhead panels Electronic Flight Instrument System (EFIS) NAV/COM settings Final CDU pre-flight procedures Before engine start After engine start Taxi Before takeoff Takeoff and initial climb After takeoff Climb to cruise level Cruise Descent Approach Landing After landing Taxi to gate/parking Shutdown (transit procedure) Shutdown…
-
Before starting engine Starting engine After starting engine Engine run up Before take off En route climb Cruise Descent Before landing After landing Parking
-
Pre Flight – Interior Pre Flight – Exterior Before engine start Engine start – warm engine Engine start – cold engine Taxiing Ground check Before takeoff Takeoff Climb Cruise Descent Approach Landing After landing Shutdown Securing
-
Pre-flight checks Pre-flight inspections Starting the engine Configuring the avionics Configure avionics for departure. Taxi Start taxiing to the runway threshold. Power (ground) check Magneto check Other checks Propeller check Alternate air check Fuel system check Before take-off checks Take-off Climb Cruise Descent Approach and landing Shutdown